Filter
Top Products
Precautions
2
Konica 7115/7118 2-1
2 Precautions
Observe the following precautions to keep the copier in the best possible conditions.
2.1 Installation Precautions
Installation site
To ensure utmost safety and prevent possible malfunctions, install the copier in a location that
meets the following requirements:
-
A location away from curtains, etc. that may catch fire and burn easily
-
A location that is not exposed to water or other liquids
-
A location free from direct sunlight
-
A location out of the direct airflow of an air conditioner or heater, and not exposed to ex-
tremely high or low temperatures
-
A well-ventilated location
-
A location that is not exposed to high humidity
-
A location that is not extremely dusty
-
A location not subjected to undue vibrations
-
A stable and level location
-
A location where ammonia or other organic gases are not generated
-
A location that does not put the operator in the direct airflow of exhaust from the copier
-
A location that is not near any kind of heating devices
Power source
The power source requirements are as follows.
●
Voltage Fluctuation: Within ±10%
●
Frequency Fluctuation: Within ±0.3Hz
Konica7115_7118.book Page 1 Friday, October 19, 2001 12:02 PM