Filter
Top Products
Troubleshooting Tips
9
Konica 7115/7118 9-3
9.2 When the Copier is not Operating Correctly
Symptom Possible Cause Action
Nothing is indicated on the control
panel.
Only the [START] key lights green. The copier is in the Power Saver
mode. Press any key on the control
panel to leave the mode. (p.3-18)
The Auto Shut OFF function has been
activated.
Turn OFF, then ON, the Power Switch.
(p.3-15)
The [START] key does not light green. An account number has not been
entered.
Enter the account number according
to the procedure given in “To enter an
account number.” (p.3-20)
No copies are produced even when
the [START] key is pressed.
An icon on the control panel is lit. Take necessary action to correct the
problem indicated by the lit icon. (p.3-
14, p.8-1)
The copier is still warming up. The copier takes about 30 seconds to
complete warming up after it has been
turned ON.
Keys on the control panel do not
respond.
The Interrupt indicator is lit. The copier is in an interrupt mode.
Press the [INTERRUPT] key to leave
the interrupt mode. (p.3-19)
The copier cannot be turned ON. The power cord is unplugged from the
power outlet.
Plug the power cord into the power
outlet.
The room’s circuit breaker is tripped. Close the room’s circuit breaker.
Konica7115_7118.book Page 3 Friday, October 19, 2001 12:02 PM