Filter
Top Products
Error Displays and Other Indicators
8
Konica 7115/7118 8-1
8 Error Displays and Other Indicators
8.1 Major Error Displays and Remedial Actions
Error Display Possible Cause Action
Toner has run out and the copier is no
longer able to make copies.
Install a new Toner Bottle. “Replacing the
Toner Bottle” (p.8-8)
Paper of good size is not available for the
copy cycle in the Auto Paper mode.
Load the paper indicated by the blinking
paper size indicator, or press the [SIZE] key
to select another paper size.
A paper misfeed has occurred in the
copier.
Identify the misfeed location on the control
panel and remove the sheet of misfed
paper. “Clearing a Paper Misfeed” (p.8-12)
A paper (original) misfeed has occurred
in the Automatic Document Feeder.
Identify the misfeed location on the control
panel and remove the sheet of misfed
paper. “Clearing a Paper Misfeed” (p.8-18)
A sheet of misfed paper is left in the
copier.
Identify the misfeed location on the control
panel and remove the sheet of misfed
paper. “Clearing a Paper Misfeed” (p.8-12)
Konica7115_7118.book Page 1 Friday, October 19, 2001 12:02 PM