Filter
Top Products
7
Using the Utility Mode
7-14 Konica 7115/7118
7.4 Custom Size Input
When nonstandard size paper is to be loaded in the 1st Tray, use this function to set the custom
size.
✎
Note
Before making this setting, be sure to select “size input” for “Paper Size Detection” in the
User’s Choice mode.
✎
Tip
To make sure that the correct values are entered, refer to
the illustration on the right to study the convention of the
paper length and width.
Custom Size Input Procedure (1st Tray)
1
Call the Utility Mode to the Display.
❍
Calling the Utility Mode to the Display (p.7-1)
2
Making sure that “U--” appears on the Display, enter “4”
on the KEYPAD.
3
Press the [START] key.
X (length)
Y (width)
Konica7115_7118.book Page 14 Friday, October 19, 2001 12:02 PM