Filter
Top Products
7
Using the Utility Mode
7-28 Konica 7115/7118
7.6 Checking the Total Number of Copies/Prints Produced
The [COUNTER] key on the control panel allows you to check the total number of copies or
printed pages produced since the installation of the copier.
It provides the following information.
●
Total Counter:
Shows the total number of copies or printed pages produced since the installation of the
copier.
●
Size Counter:
Shows the number of copies or printed pages produced on paper of a preset size. (The size
will be set by your authorized Konica Service Representative.)
Using the [COUNTER] Key
1
Press the [COUNTER] Key.
2
Make sure that “tc” appears on the Display.
The Total Counter value is then displayed.
E.g.: The Display looks like the one shown on the right
when the value is 1,234.
3
If you want to also check the Size Counter, press the
[COUNTER] key a second time.
Konica7115_7118.book Page 28 Friday, October 19, 2001 12:02 PM