Filter
Top Products
Accessing User Tools (Copy/Document Server Features)
99
5
General Features
2
/
5
❖
❖❖
❖ Duplex Mode Priority
You can select the type of Duplex
function effective when the ma-
chine is turned on or reset, or when
modes are cleared.
❖
❖❖
❖ Copy Orientation in Duplex Mode
You can set copy orientation when
making two-sided copies.
❖
❖❖
❖ Original Orientation in Duplex Mode
You can set original orientation
when making two-sided copies.
❖
❖❖
❖ Change Initial Mode
You can select the initial mode or
Program No. 10 as the mode effec-
tive when the machine is turned on
or reset, or when modes are
cleared.
❖
❖❖
❖ Max. Copy Quantity
The maximum copy quantity can
be between 1 and 999.
❖
❖❖
❖ Tone: Original remains
The beeper (key tone) sounds
when you forget to remove origi-
nals after copying.
Note
❒ If the "Panel Tone" in User Tools
(System Settings) is "Off", the
beeper does not sound irrespec-
tive of the "Tone: Original re-
mains" setting. ⇒"Panel Tone"
in the General Settings Guide
❖
❖❖
❖ Job End Call
You can choose to have the beeper
sound when copying is complete.
Note
❒ If the "Panel Tone" in the User
Tools (System Settings) is "On",
the machine beeps to notify you
if it did not complete a job, for
reasons such as: copying was in-
terrupted, the paper tray ran
out of paper or a paper jam oc-
curred.
General Features
3
/
5
❖
❖❖
❖ Copy Function Key: F1–F5
You can register frequently used
functions in function keys F1 to F5.
You can also change registered
functions.
General Features
4
/
5
❖
❖❖
❖ Document Server Storage Key: F1–F5
You can register frequently used
functions in function keys F1 to F5.
You can also change registered
functions.
MartiniC1_GBcopy4_FM.book Page 99 Tuesday, April 23, 2002 6:23 PM