Lanier LD075 Copier User Manual


 
Supplementary Specifications
111
6
Supplementary Specifications
Batch Mode
In Batch mode, you cannot switch between 1sided originals and 2sided
originals in the middle of copying.
Mixed Size mode
Copy speed and scanning speed may be reduced.
Bypass Tray Copy
The following paper sizes can be selected:
A3L, A4KL, A5KL, A6L, B4L, B5KL, B6L, 11 × 17L, Legal(8
1
/
2
× 14)L, Letter(8
1
/
2
× 11)KL, 5
1
/
2
× 8
1
/
2
KL, Executive(7
1
/
4
×
10
1
/
2
)KL, 8 × 13L, 8
1
/
2
× 13L, 8
1
/
4
× 13K, 11 × 14L, 11 ×
15L, 10 × 14L, 10 × 15L, 8
1
/
4
× 14L, 8 × 10
1
/
2
KL, 8 × 10KL,
12 × 18L, Postcards (100 × 148mm)
The number of sheets you can set in the bypass tray depends on the paper
type. If the number set exceeds that in the table below, paper misfeeds may
occur or copies may be skewed.
Preset Enlarge/Reduce
Note
You can select one of 12 preset ratios (5 enlargement ratios, 7 reduction ra-
tios).
You can select a ratio regardless of the size of an original or copy paper.
With some ratios, parts of the image might not be copied or margins will
appear.
Copies can be reduced or enlarged as follows.
Paper type Number
Thick paper (105/157g/m
2
) 30 sheets
Thick paper (157/216g/m
2
) 20 sheets
Translucent paper 50 sheets
OHP transparencies 50 sheets
MartiniC1_GBcopy4_FM.book Page 111 Tuesday, April 23, 2002 6:23 PM