Filter
Top Products
Using a ash media Card
Your computer has one Media Card Reader slot.
The Media Card Reader slot supports the following cards:
• SD card
• SDHC card
• SDXC card
• MultiMediaCard (MMC)
Note: When transferring data to or from a media card, such as an SD card, do not put your computer in
sleep (standby) or hibernation mode before the data transfer is complete. To do so might cause damage to
your data.
For more information on ash media cards, refer to any of the following topics:
• “Inserting a ash media card” on page 53
• “Removing a ash media card” on page 54
Inserting a ash media card
Attention: Before you start installing any of the following cards, touch a metal table or a grounded metal
object. This action reduces any static electricity from your body. The static electricity could damage the card.
• SD card
• SDHC card
• SDXC card
• MultiMediaCard
To insert a ash media card into the 4-in-1 media card reader slot, do the following:
• Make sure that the card is correctly oriented.
• Insert the card rmly into the 4-in-1 media card reader slot. The card may stop before it is completely
installed into the slot.
If the ash media card is not Plug and Play, do the following:
• For Windows 7:
1. Open Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or conrmation, type the
password or provide conrmation.
4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.
5. Follow the instructions on the screen.
• For Windows XP:
– Open Control Panel and switch to Classic view.
– Double-click the Add Hardware icon. The Add Hardware Wizard starts.
– Follow the instructions on the screen.
Chapter 2. Using your computer 53