Filter
Top Products
• MultiMediaCard (MMC) module
• Secure Digital eXtended-Capacity(SDXC) card
• Secure Digital (SD) card
• Secure Digital High-Capacity (SDHC) card
Note: Your computer does not support the CPRM feature for the SD card.
Attention: While transferring data to or from a ash media card, such as an SD card, do not put your
computer into sleep or hibernation mode before the data transfer completes; otherwise, your data could
become damaged.
Installing a ash media card
Attention:
• Before you start installing a card, touch a metal table or a grounded metal object. This action reduces any
static electricity from your body. Static electricity could damage the card.
To install a ash media card, do the following:
1. Ensure that the card is correctly oriented.
2. Insert the card rmly into the slot of the 4-in-1 media card reader.
If the plug-and-play feature is not enabled for the installed ash media card, do the following to enable
the feature:
1. Go to Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or conrmation, type the
password or provide conrmation.
4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.
5. Follow the instructions on the screen.
Removing a ash media card
Attention:
• Before removing a card, stop the card rst. Otherwise, data on the card might be damaged or lost.
• Do not remove a card while the computer is in sleep mode or hibernation mode. Otherwise, the system
might not respond when you try to resume operation.
To remove a card, do the following:
1. Click the triangular icon on the taskbar to show hidden icons. Then, right-click the Safely Remove
Hardware and Eject Media icon.
2. Select the item you want to remove to stop the card.
3. Press the card to eject it from your computer.
4. Remove the card and store it safely for future use.
Note: If you do not remove the card from your computer after you eject the card from the Windows operating
system, the card can no longer be accessed. To access the card, you must remove it rst, then insert it again.
42 User Guide