Lenovo 243858U Laptop User Manual


 
1. Turn on the computer. When the logo screen is displayed, press the F1 key. The ThinkPad Setup
program main menu opens.
Note: If you have set a supervisor password, the ThinkPad Setup program main menu will be displayed
after you enter the password. You can start ThinkPad Setup by pressing Enter instead of entering the
supervisor password. However, you cannot change the parameters that are protected by the supervisor
password. For more information, refer to “Using passwords” on page 51
.
2. Use the cursor keys to move to an item you want to change. When the item is highlighted, press
Enter. A submenu is displayed.
3. Change the items you wish to change. To change the value of an item, press the following keys:
F6 or the combination of Shift and + : Change to a higher value.
F5 or : Change to a lower value.
If the item has a submenu, press Enter to display it.
4. Press Esc to exit from the submenu.
5. If you are on a nested submenu, press Esc repeatedly until you reach the ThinkPad Setup program
main menu.
Note: If you need to restore the settings to their original state as of the time of purchase, press F9 to
load the default settings. You also can select an option on the Restart submenu to load the default
settings or discard the changes.
6. Select Restart. Move the cursor to the option you want for restarting your computer, then press Enter.
Your computer restarts.
Note: Depending on the operating system you are using, some menu items listed in this chapter might not
be available on your computer, and some menu items might be slightly different from the actual menu items
displayed on your computer.
Main menu
The Main menu is the rst interface you see after you enter ThinkPad Setup. It displays the following
conguration of your computer:
UEFI version
UEFI date
Embedded controller version
Machine type model
System-unit serial number
System board serial number
Asset tag
CPU type
CPU speed
Installed memory
UUID
MAC address (Internal LAN)
Preinstalled operating system license
UEFI Secure Boot
Cong menu
If you need to change the conguration of your computer, select Cong from the ThinkPad Setup menu.
Chapter 8. Advanced conguration 115