Filter
Top Products
00000000
00000000
00000000
00000000
00000000
Removing and installing the bezel
To remove the bezel, complete the following steps:
1. Remove the server from the rack and remove the cover (see “Removing and installing the cover” on
page 119).
2. From inside the server, press the bezel release latch 1 toward the left side of the server.
3. Pivot the bezel 2 forward and pull it away from the server.
0000
0000
0000
000000000
000000000
000000000
00000
00000
00000
00000
00000
00000
00000
00000
4. If you are instructed to return the bezel, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
120 Hardware Maintenance Manual