Filter
Top Products
Microprocessor
Heatsink
Orientation
DIMMs
DIMMs
4. If you are instructed to return the virtual media key, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Installing the virtual media key
To install the virtual media key, complete the following steps:
1. Read the safety information in “Important Safety Information” on page 1 and “Guidelines for trained
service technicians” on page 115.
2. Remove the cover (see “Removing and installing the cover” on page 119).
3. Align the virtual media key 4 with the mounting tab 2 and 1 ; then slide it down the tab onto the
connector 3 on the system board. Press the virtual media key down into the connector until it is rmly
seated on the system board.
166 Hardware Maintenance Manual