Filter
Top Products
9. Slide the new solid-state drive into the solid-state drive bracket as shown until the four holes in the
drive are aligned with the corresponding holes in the bracket. Then, install the four screws to secure the
new solid-state drive to the bracket.
Figure 74. Installing the solid-state drive into the bracket
10. Carefully slide the solid-state drive bracket downward until it is secured by the three retaining clips 1 on
the bottom of the optical drive bay.
Figure 75. Installing the solid-state drive bracket
11. Install the screw 1 to secure the bracket on the bottom of the optical drive bay.
Chapter 10. Replacing FRUs (machine type: 10AQ) 137