Filter
Top Products
Figure 86. Installing the new slim card reader into the bracket
9. Route the cable of the new card reader through the corresponding hole for the card reader bracket in
the front of the chassis.
10. Install the bracket into the chassis so that the hole in the bracket is aligned with the corresponding hole
in the chassis. Then, Install the screw to secure the card reader bracket to the chassis.
Figure 87. Installing the slim card reader bracket
11. Connect the cable of the new slim card reader to the system board. See “Locating parts on the
system board” on page 80.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 169.
Chapter 10. Replacing FRUs (machine type: 10AQ) 145