Use To
Press Sleep Button
Do Nothing
Sleep
Hibernate
Determine how the printer responds when pressing the Sleep
button when the printer is idle.
Notes:
• Sleep is the factory default setting.
• Sleep or Hibernate sets the printer to operate at a lower
power configuration.
• If the printer is in Sleep Mode, then the display appears off
and the Sleep button turns amber.
• Touch anywhere on the display or press a button on the
printer control panel to exit Sleep Mode.
• If the printer is in Hibernate mode, then the display is
completely off and the Sleep button turns amber and is
blinking.
Press and Hold Sleep Button
Do Nothing
Sleep
Hibernate
Determine how the printer responds when pressing the Sleep
button when the printer is idle.
Notes:
• Do Nothing is the factory default setting.
• Sleep or Hibernate sets the printer to operate at a lower
power configuration.
• If the printer is in Sleep Mode, then the display appears off
and the Sleep button turns amber.
• Press and hold the Sleep button for 3 seconds or longer to
enter Hibernate mode.
• Touch anywhere on the display or press a button on the
printer control panel to exit Sleep Mode.
Factory Defaults
Do Not Restore
Restore Now
Restore the printer settings to the factory default settings.
Notes:
• Do Not Restore is the factory default setting. This keeps the
user‑defined settings.
• Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in RAM are deleted. Downloads stored in
flash memory or on a printer hard disk are not affected.
Copy Settings menu
Use To
Content Type
Text
Graphics
Text/Photo
Photo
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Understanding the printer menus 202