Lexmark 496 Scanner User Manual


 
Saving energy
Using EcoMode
1 Open a Web browser, and then type the printer IP address in the address field.
Notes:
View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2 Click Settings > General Settings > EcoMode > select a setting
Use To
Off Use the factory default settings for all settings associated with EcoMode. Off supports the performance
specifications of the printer.
Energy Reduce energy use, especially when the printer is idle.
Printer engine motors do not start until it is ready to print. You may notice a short delay before the
first page is printed.
The printer enters Sleep mode after one minute of inactivity.
Energy/Paper Use all the settings associated with Energy and Paper modes.
Plain Paper
Enable the automatic twosided (duplex) feature.
Turn off print log features.
3 Click Submit.
Reducing printer noise
Enable Quiet Mode to reduce printer noise.
1 Open a Web browser, and then type the printer IP address in the address field.
Notes:
View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2 Click Settings > General Settings > Quiet Mode > select a setting
Saving money and the environment 242