Lexmark 496 Scanner User Manual


 
Insufficient memory to support Resource Save feature [35]
Install additional printer memory or touch Continue to disable Resource Save, clear the message, and continue printing.
Insufficient memory, some Held Jobs were deleted [37]
From the printer control panel, touch Continue to clear the message.
Insufficient memory, some held jobs will not be restored [37]
Try one or more of the following:
From the printer control panel, touch Continue to clear the message.
Delete other held jobs to free up additional printer memory.
Load [paper source] with [custom string] [paper orientation]
Try one or more of the following:
Load the indicated tray or feeder with the correct size and type of paper.
To use the tray with the correct paper size or type, touch Finished loading paper on the printer control panel.
Note: If the printer finds a tray that has the correct paper size and type, then it feeds from that tray. If the
printer cannot find a tray with the correct paper type and size, then it prints from the default paper source.
Cancel the current job.
Load [paper source] with [custom type name] [paper orientation]
Try one or more of the following:
Load the tray or feeder with the correct size and type of paper.
To use the tray with the correct paper size or type, touch Finished loading paper on the printer control panel.
Note: If the printer detects a tray that has the correct paper size and type, then it feeds from that tray. If the
printer cannot detect a tray that has the correct paper size and type, then it prints from the default paper
source.
Cancel the current job.
Load [paper source] with [paper size] [paper orientation]
Try one or more of the following:
Load the specified tray or feeder with the correct size of paper.
To use the tray or feeder with the correct size of paper, touch Finished loading paper on the printer control panel.
Note: If the printer finds a tray or feeder that has the correct size of paper, then it feeds from that tray or
feeder. If the printer cannot find a tray or feeder with the correct size of paper, then it prints from the default
paper source.
Cancel the current job.
Troubleshooting 307