Filter
Top Products
Installation and Configuration 90
Note:
The Extension Node Identifier (the number of the slot in the GRF,
the SP Switch Router Adapter card is seated)
must
be given as a two-digit
number, so slots 0-9
must
be entered as 00-09!
• Command:
smitty enter_extadapter
Enter Extension Node Information
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Administrative Hostname [grf16.msc.itso.ibm.com]
SNMP Community Name [spenmgmt]
Extension Node Identifier [03]
SNMP Agent Hostname [grf16.msc.itso.ibm.com]
Reconfigure the extension node? no +
* Node Number [4] #
COMMAND STATUS
Command: OK stdout: yes stderr: no
Before command completion, additional instructions may appear below.
The endefnode command has completed successfully.
Enter Extension Node Adapter Information
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Network Address [192.168.14.4]
Network Netmask [255.255.255.0]
Reconfigure the extension node? no +
* Node Number [4] #