Filter
Top Products
GRF Configuration Files 269
# The PVC section is where Permanent Virtual Circuits are defined,
# using traffic shapes defined in the Traffic Shaping section,
# along with other parameters specific to PVC configuration.
#
#
# Notes on the format of this file:
#
# Comments follow the Bourne Shell style (all characters following a #
# on a line are ignored).
#
# Statements in this file are separated by newlines. A statement may
# span multiple lines by ending each incomplete line of the statement
# with a ’\’ character. Example:
#
# Traffic_Shape name=high_speed peak=15000 # this is a statement
#
# Service name=bc0 type=bcast addr=198.174.11.1 \ # this is also a statement
# addr=198.176.11.1
#
# User-defined names for Traffic_Shape’s and Service’s must be defined
# before they are used, ie., the definition of a traffic shape must
# precede its use in an Interface or PVC specification, and the
# definition of a Service must precede the use of the name of that
# service in defining any Interfaces.
#
#
# ARP Service info
#
# Lines beginning with the keyword "Service" define virtual "services" which
# may or may not be present on an ATM network attached to a GigaRouter.
#
# Each Service entry the ATM configuration file has the following format:
#
# Service name=value type=arp|bcast addr=value [addr=value ...]
#
# The "name" field is a unique name to identify this ATM service
#
# The "type" field specifies the type of ATM service being configured.
# and how the address argument(s) which follow are interpreted.
#
# type=arp Indicates an ARP service. One to three "addr" field(s)
# must follow, defining NSAP addresses of ARP
# services on the attached ATM network.
#
# A logical interface using this "Service" entry
# will connect to one of the addresses defined for
# this service to get ATM address information for
# any IP addresses it does not already know the
# ATM address of.
#
# type=bcast Defines a "broadcast service". The "addr" field(s)
# contain IP addresses of hosts on a given logical
# logical ATM network to which copies of any broadcast
# packets will be sent, allowing the GigaRouter, when
# so configured, to simulate broadcast over a logical
# IP network.
#
#Service name=arp0 type=arp addr=47000580ffe1000000f21513eb0020481513eb00