Filter
Top Products
Configuration of IP-Forwarding Media Cards 117
The following message is returned along with the changed prompt:
Current port card is 3
GR 3>
.
• To leave any
maint prompt and return to the shell, enter quit.
Following are just a few
maint commands we have found useful; of course,
your experiences may vary.
To see the list of
maint commands for the receive side, enter maint 1; to see
the list of
maint commands for the transmit side, enter maint 101.
The
maint 3 command gives you useful options for looking at a variety of
active interfaces. To look at media information per port,
use maint 4 and the
port number,
0 or 1. Use maint 4 0 to see the information for the card’s port
0.
To display switch statistics, use
maint 5, which will give you information about
the number of packets to and from the switch (in the GRF).
You can return information about VPI/VCIs on a per port, per side basis with
maint 13 0 or maint 13 1, respectively. For information about traffic statistics
use
maint 14 0 or maint 14 1, respectively.