Filter
Top Products
- 15 -
Qos Policy: High Priority Levels: This is used to map the 0~7 priority levels to
either High or Low queues.
Collisions Retry Forever: (this setting only affects Half Duplex connections)
Disable – Any collisions are retried for a maximum of 48 times, after which the
packet will be dropped.
Enable – Collision will be retried indefinitely.
802.1x Protocol: Enables or disables the 802.1x port security protocol.
2.4.3 Console Port Information
The Console port on the 24 + 2 Giga SNMP Ethernet Switch is a standard RS-232
UART interface. This is used to connect to the serial interface on your PC, or
terminal.
You can use Windows HyperTerminal program to link the switch to your PC.
The following settings need to be configured into your Terminal Application:
Bits per seconds: 9600
Data bits: 8
Parity: none
Stop Bits: 1
Flow control: none