Filter
Top Products
- 56 -
4.3.1.2 STP System Configuration
<-Actions->
1. Root Bridge information is displayed on the Left.
2. Parameters can be defined on the Right.
NOTE: The parameters are described in more detail in sections 2-4-8.
4.3.1.3 Perport Configurations
<-Actions->
1. PortState: Displays the spanning tree status for each port. Forwarding or
Blocking.
2. PathCost: Specifies the path cost for the port. This is used in determining which
ports are used as forwarding ports.
3. Priority: This defines the port priority. Low values are more likely to become the
root port.