Filter
Top Products
- 38 -
4.2.1 Port Configuration
Edit / View the port configuration.
1. InRate (100K/unit):
0: disable rate control.
1~1000: valid rate value.
2. OutRate (100K/unit):
0: disable rate control.
1~1000: valid rate value.
3. Enabled:
Enables or Disables this port in the switch.
“Yes” = Enable.
“No” = Disable.
4. Auto:
Define Auto negotiation mode. Options: “Auto”, “Nway_Force”, “Force”
Spd/Dpx:
Define the port speed and Duplex.
5. Flow Control:
Full: Enables or Disables Full Duplex flow control
Half: Enables or Disables Half Duplex flow control. (Backpressure)