Filter
Top Products
- 18 -
4. Work ports: Allows a maximum of four ports to be aggregated at the same time. If
the group is defined as a LACP static trunking group, then any extra ports
selected are placed in a standby mode for redundancy if one of the other ports
fails. If the group is defined as a local static trunking group, then the number of
ports must be the same as the group member ports.
NOTE: If LACP is enabled, you can configure LACP Active/Passive status in each
port on State Activity page.
2.4.5.2 Aggregator Information
This page displays a summary report on the current LACP aggregator status.
1. In this example there is no group active. LACP is not operational.
2. In this example there are 2 Static Trunking groups.
3. In this example there is an active LACP trunking group.