Magnetek TM7310rev01 Computer Hardware User Manual


 
Quattro DC Fault F0 Menu
FAULT HISTORY
This sub-menu contains a list of up to the last
sixteen faults.
NOTE: The fault history is not affected by the
fault reset or a power loss. The fault history
can only be cleared by a function in this sub-
menu.
All faults are placed in the fault history. The
fault history displays the last 16 faults that
have occurred and a time stamp indicating
when
Press the enter key to enter the fault history.
Use the up a
throug
FAULT COUNTERS
Fault Counter
Press the enter key to enter the fault history.
Use the up and down arrow keys to scroll
through the faults.
(Fault History)
Fault History
each happened.
nd down arrow keys to scroll
h the faults.
(Fault Counters)
This sub-menu contains a list of all the faults
and the numbers of times they occurred.
NOTE: The fault counters list is not affected by
the fault reset or a power loss. The fault
counters can only be cleared by a clear fault
history
All faults possible are located in the Fault
Counter. The fault counter shows each fault
and the number of times it occurred until
cleared by the Clear Fault History function.
RUN/FAULT
SUB MENU
DATA ENT
01 CHARGE FAULT
F2 0.0097 hrs
Clearing Fault History
The fault history is not affected by the fault
reset or a power loss. The fault history can
only be cleared via the user function described
below. Clearing the Fault History will also
clear the Fault Counters.
Enter the submenu in F2 by pressing the
ENTER key. The sub-menu LED will turn ON,
and the Digital Operator will display:
Press the ENTER key again to begin the
fault reset procedure.
The active faults must be cleared in order to
clear the fault history. If not the following
message will appear when trying to clear the
fault history.
The sub-menu LED will go out and the data
ent LED will turn on.
RUN/FAULT
SUB MENU
DATA ENT
DISPLAY FAULT
F2 HISTORY?
RUN/FAULT
SUB MENU
DATA ENT
CLEAR FAULT
F2 HISTORY?
RUN/FAULT
SUB MENU
DATA ENT
01 CHARGE FAULT
F2 0.0097 hrs
RUN/FAULT
SUB MENU
DATA ENT
RST FAULTS FIRST
PUSH ANY KEY
RUN/FAULT
SUB MENU
DATA ENT
RESET ISSUED
PUSH ANY KEY
RUN/FAULT
SUB MENU
DATA ENT
DISPLAY FAULT
F2 COUNTERS?
77