Filter
Top Products
Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-4
Port Config Button
Select Port Config to configure the physical and logical characteristics of the WAN ports of the
Magnum Router (the WAN ports are M1, WAN1, WAN2 and WAN3). Physical characteristics
determine whether the port is DTE (accepts clock), DCE (supplies clock) and port speed.
Logical characteristics include the Frame Relay LMI type and the Frame Relay link type.
To get to the Port Configuration screen from the manager main screen, click the P
ort Config
button, or press ALT-P. This is also accessible by clicking on the S
ettings menu and selecting
Port Configuration.
Save any configuration
Changes that have been
made
Exit this screen to the
Main Screen
Select which WAN port
to configure by clicking
in the circle next to the
port name
Choose the MODE of
the selected port
Select the port's frame
relay link type
Select the port's speed
Select the LMI Type
Add NOTES to assist in
documentation
Figure 16 - Port Configuration Screen