Filter
Top Products
Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-6
Baud Rate
Sets the baud rate for the selected port. Choose from the baud rates available in the drop down
list box.
Baud Rate Notes
A
baud rate denotes the speed of which a serial port is to operate at. The Magnum Route
r
handles baud rates in the following manner:
When the Port Mode is selected as DCE, then the baud rate selected is the reported cloc
k
speed to the attached device. However, if the Port Mode is selected as DTE (which would
accept clock from an external source), the baud rate box changes to a Carrier Rate box and
denotes the accepted clocking speed of an attached device.
Notes
The notes field of the Port Settings screen gives a convenient way to document data that is
relevant to the selected port, such as circuit ID, or where the port connects to, etc.
Save
Select Sav
e to save changes to the Magnum Router Manager.
Exit
Select Ex
it to close this screen and return to the Magnum Router Manager main screen.