Maxtor Atlas 10K V 5-121
0x02
Not Ready
0x04 0x00 Drive Not Ready
0x04 0x01 Drive Not Ready, in process of coming ready
0x04 0x02 Drive Not Ready, use START cmd
0x04 0x04 Drive Not Ready, formatting
0x04 0x09 Drive Not Ready, self test in progress
0x04 0x80 FileSystem Boot Area unreadable @ POR
0x04 0x82 File has not been written - can not read
0x04 0x83 Error reading diskware file
0x04 0x84 Diskware not loaded yet - issue start cmd
0x04 0x85 Code jumped to Dead Vector
0x04 0x86 Drive Not Ready, config page 8/HDA mismatched
0x04 0x88 Error reading Config Page file
0x04 0x91 Drive Not Ready, selfscan is running
0x04 0x92 NVR image not compatible
0x19 0x01 Drive Not Ready, Unknown defect list
0x19 0x03 Drive Not Ready, Bad grown defect list
0x31 0x00 Drive Not Ready, Format corrupted
0x40 0x80 Drive Not Ready, Unknown HW problem
0x40 0x81 Drive Not Ready, NVR is Corrupt
0x40 0x82 Drive Not Ready, CP section of EEPROM is Corrupt
0x40 0x83 Drive Not Ready, Failed HDA test
0x40 0x84 Drive Not Ready, Failed PCB test
0x40 0x85 Drive Not Ready, PM section of EEPROM is Corrupt
0x40 0x86 Drive Not Ready, Flash vector table is Corrupt
0x40 0x99 ROM and resident code are incompatible
0x03
Medium Error
0x02 0x00 No seek complete.
0x03 0x01 Pre-Amp write unsafe
0x03 0x84 DIAG: Write fault
0x0C 0x00 Write error
0x0C 0x02 Write error - auto reallocation failed.
0x0C 0x03 Write error - recommend reassignment
0x11 0x00 Unrecovered read error
0x11 0x04 Unrecovered read error - auto reallocate failed
0x11 0x0C Unrecovered read error - pending reallocation
0x11 0x8B Unrecovered read error - thermal asperity error
0x11 0x81 System file has checksum error
0x11 0x84 Error reading Diskware vector table file
0x15 0x00 Positioning error detected by drive, check UPT
0x15 0x02 Positioning error detected by read
0x15 0x80 Positioning error detected by write
Sense
Key
Sense
Code
Sense
Qualifier
Meaning