Maxtor 10K V Computer Drive User Manual


 
5-10 Maxtor Atlas 10K V
READ BUFFER Allocation ---
READ BUFFER Header (4)
Mode-zero Buffer (512) or
Section of Drive’s DRAM or
READ BUFFER Desc. (4)
READ CAPACITY Allocation --- READ CAPACITY data (8)
READ DEFECT
DATA
Allocation ---
• Defect List (Hdr) (4)
• Defect Descriptors
READ LONG
Byte Transfer
(Must be 578) ---
• Data (512)
• LBA Tag (2)
• EDC (2)
• ECC (60)
• Fill (2)
REASSIGN
BLOCKS
0 Defect List Header(4) Defect Descriptors
RECEIVE
DIAGNOSTIC
RESULTS
Allocation ---
Diagnostic Page
RELEASE 0 --- ---
REPORT DEVICE
IDENTIFIER
REQUEST SENSE Allocation --- Sense Data (18)
RESERVE
0
(Extent List
Option not
supported)
--- ---
REZERO UNIT 0 --- ---
Command Length in CDB Data Out (To Drive) Data In (To Initiator)
SEEK (6)(10) 0 --- ---
SEND DIAGNOS-
TIC
Parameter List Diagnostic Page ---
SET DEVICE
IDENTIFIER
START STOP UNIT 0 --- ---
SYNCHRONIZE
CACHE
0--- ---
TEST UNIT READY 0 --- ---
VERIFY Transfer Data ---
WRITE (6)(10) Transfer Data ---
WRITE AND VERI-
FY
Transfer Data ---
WRITE BUFFER
Parameter List
Zeros (4)
Mode-zero buffer (512)
or Data to put into DRAM
or Microcode image
or Microcode image
(successive 16 KB pieces)
---
Command Length in CDB Data Out (To Drive) Data In (To Initiator)