Filter
Top Products
Maxtor Atlas 10K V 3-1
Chapter 3
INSTALLATION
This chapter explains how to unpack, configure, mount, and connect the
Maxtor Atlas 10K V hard disk drive prior to operation. It also explains how to start
up and operate the drive.
3.1 SAFETY, HANDLING, & ELECTROSTATIC DISCHARGE
PROTECTION
3.1.1 Safety Precautions
For your safety, follow all safety procedures described here and in other sections of
the manual.
• Remove power from the computer system (or expansion unit) before
installing or removing the drive to prevent the possibility of electrical
shock or damage to the drive. Unplug the unit containing the drive to
provide an added measure of safety.
• Read, understand, and observe all label warnings.
3.1.2 Handling
Damage to the drive can occur as the result of careless handling, vibration, shock,
or electrostatic discharge (ESD). Always handle the drive with care to avoid damage
to the precision internal components.
Follow these guidelines to avoid damage to the drive:
• Always observe prescribed ESD precautions.
• Keep the drive in its anti-static bag until ready to install.
• Always use a properly fitted wrist strap or other suitable ESD protection
when handling the drive.
• Hold drive only by its sides. Do not touch any components on the
PCBA.
CAUTION: A 1/4-inch drop onto a hard surface can damage the drive.