Filter
Top Products
GCC Setup
page 2 — 5
User Manual
2.1.3 Change Password
Change Password will allow the User to change the default password ‘manager’ to a new User password.
NOTE: Must be in the Setup Screen to change password. See section
2.1.1 Enter Setup Screen for instructions.
Proceed as follows: (Lower case and 20 characters maximum)
1. From the menu button click the Change Password button.
2. In the “New Password” text field type a new password. (up to 20 characters maximum, lower case)
Refer to Figure 2-5. For instructions to use the keypad, see section 1.4 Keypad.
3. In the “Confirm Password” field enter the new password a second time to confirm the change, and press
“Enter”. When the new password is changed a confirmation box will appear to verify password is saved.
Figure 2-5: Change Password Screen.
To exit the screen without changes click “Back to Setup page” button.
manager
Enter
Back to Setup page
Double tap on cursor to bring up keyboard
New Password
manager
Confirm Password
20 characters max.
Password
Changed
Once the
password is
changed this
confirmation
indicator is
displayed.