Filter
Top Products
1.0 Scope
This section is a general introduction and overview of the MGE Graphical Command Center (GCC).
1.1 Reference Manuals
86-132203-00 EPS 8000 625-800kVA User Manual, Single-Module
86-132202-00 EPS 8000 625-800kVA User Manual, Parallel System
86-132201-55 EPS 8000 625-800kVA Installation Manual, Single and Parallel Systems, 50/60 Hz
86-130033-00 EPS 6000 User Manual, 150-750kVA Single-Module
86-130034-00 EPS 6000 User Manual, 150-750kVA Multi-Module
86-131107-00 EPS 6000 User Manual, Parallel-Connected Single UPS Units
6739390XU EPS 6000 Communication Manual, 50/60 Hz
1.2 Section Descriptions
This manual is divided into six sections:
Section 1 — Introduction
This section is a general introduction and overview of the MGE Graphical Command Center (GCC).
Section 2— GCC Setup
This section guides the User through the GCC login and custom configuration screens.
Section 3 — GCC Screens
This section describes each screen, the menu buttons, and how to navigate from screen to screen.
Section 4— GCC Mimic Diagrams
This section provides GCC mimic diagrams representing the common status and fault modes.
Section 5 — GCC Alarms
This section describes the captured alarms and events, including how to acknowledge and clear the alarm history
log.
Section 6 — GCC Troubleshooting
This section contains a troubleshooting guide to assist the User with any communication and configuration
problems.
A Glossary in the rear of this manual provides definitions of terms used within the text.
User Manual
Introduction
Introduction
page 1 — 1