Filter
Top Products
Both Dip switches S1 and S2 are marked with individual switch numbers 1 through 4. Use these numbers, as well
as the "ON" designation to orient the switch properly, see Figure 6-10. Use a small screwdriver or similar instrument
to set each individual switch. Refer to Table 6-3 to set the Dip switches.
Figure 6-9: Converter Switch Access.
Figure 6-10: Converter Dip Switches.
Table 6-3: Converter Dip Switch Settings.
Switch S1 Position Switch S2 Position
S1-1 ON S2-1 OFF
S1-2 OFF S2-2 OFF
S1-3 OFF S2-3 OFF
S1-4 OFF S2-4 OFF
GCC Troubleshooting
Graphical Command Center
page 6 —8
"ON"
"OFF"
1234
ON