Filter
Top Products
2.0 Scope
This section guides the User through the GCC login and custom configuration screens.
2.1 GCC Setup Screens
The following GCC Setup screens are described in this section:
◗ Enter Setup
◗ Identification Setup, Single-Module
◗ Identification Setup, Multi-Module
◗ System Configuration, Multi-Module
◗ Change Password
◗ Control Panel
2.1.1 Enter Setup Screen
From the menu button click the “Setup” button to open the Enter Setup screen. Type the default password,
‘manager’, as shown in Figure 2-1. When the password is accepted, the Identification Setup screen opens and
the User may change the password at that time or continue with the setup. Refer to section 1.4 Keypad for instruc-
tions to use the keypad.
Figure 2-1: Enter Setup Screen.
User Manual
GCC Setup
GCC Setup
page 2 — 1
Enter Setup
Enter
Load
Battery
Online
Trend
Input
Rectifier
Inverter
UPS 1
Load
Protected
ALARMS
14:02:02
01/24/2003
Setup
EXIT
mana
g
e
r
Pass
w
o
r
d
Enter default
password
‘manager’
and press
<Enter>