Filter
Top Products
1.5 GCC Configurations
Three separate series of mimic diagrams are available:
1. Single-Module (S-M)
2. Multi-Module (M-M)
3. Static Switch Cabinet (SSC)
The GCC is located on the UPS Module, the Static Switch Cabinet or both. A Single-Module UPS configuration is
shown in Figure 1-2. A Multi-Module UPS and SSC with a GCC on each UPS is shown in Figure 1-3. A Multi-
Module UPS and SSC with one GCC on the SSC is shown in Figure 1-4.
Figure 1-2: S-M Configuration, 1 GCC per Module. (800kVA UPS system shown)
Introduction
Graphical Command Center
page 1 — 4