Filter
Top Products
5-17
Chapter 5Solving Printer Problems
(4) Operator Call Messages
MANUAL FEED
(paper) (user name)
MESSAGE
DESCRIPTION AND ACTION
Load the specified paper in tray 1.
Press the On Line key to print.
The correct paper has not been loaded in
tray xx.
Load the specified paper in tray xx.
If tray xx is tray 1, you need to make the
paper size setting changes in the tray 1
paper size setting mode according to your
needs, after loading the specified paper.
See page 3-2.
LOAD (tray xx)
(paper) (user name)
*Printing
LOAD (tray xx)
(paper)
*Stand-by
LOAD
(paper) (user name)
Load the specified paper into any tray.
There is no specified paper in the tray
(tray xx) you specified from the control
panel.
Load the specified paper in tray xx or
make the paper size and paper tray setting
changes in the print menu at the control
panel.
See page 3-1 and 3-7.
Install tray 2 or make the paper tray setting
changes in the print menu.
LOAD TRAY 2
NO TRAY
Install tray 3 or make the paper tray setting
changes in the print menu.
LOAD TRAY 3
NO TRAY
There is no paper in all trays.
Load paper into any tray.
OUT OF PAPER
ALL TRAYS
COVER OPEN
The upper cover is open. Close the upper
cover.
DUPLEX OPEN
The duplex upper or lower cover is open.
Close the duplex cover.
4. Understanding Printer Messages
Trouble5.frm 17 ページ ２００３年１１月１８日 火曜日 午前９時５３分