Minolta 20 Printer User Manual


 
vi
FCC/ICES (2/2)
USER INSTRUCTIONS (FOR U.S.A. Users)
FCC PART 15-RADIO FREQUENCY DEVICE WARNING
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.
This device must be used with shielded interface cables. The use of
non-shielded cables is likely to result in interference with radio
communications and is prohibited under the FCC rules.
The design and production of this unit conform to FCC regulations,
and any changes or modifications must be registered with the FCC
and are subject to FCC control. Any changes made by the purchaser
or user without first contacting the manufacturer will be subject to
penalty under FCC regulations.
USER INSTRUCTIONS (For Canadian Users)
INTERFERENCE-CAUSING EQUIPMENT STANDARD
(ICES-003 ISSUE 2) WARNING
NOTE: Installed Minolta Network options. When the Network
cable is attached to either of the IEEE 802.3 connectors, the
printer meets the requirements of FCC/ICES Class A.
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appil numérique de la classeA respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
Foreword
Foreword.frm vi ページ 2003年11月18日 火曜日 午前9時47分