Filter
Top Products
1-8
Chapter 1Introduction
Key Functions
On Line key
Press the On Line key to switch between on-line and off-line. The
printer should be on-line to receive data.
Proceed key
Press the Proceed key to resume printing after an interruption.
This key is pressed:
- when a paper size error (LOAD message) occurs.
See “Operator Call Message” page 5-17.
- when the Paper Size Error occurs.
See “Operator Call Message” page 5-18.
- when the Memory Overflow or Job Too Complex error occurs.
See “Caution Message” page 5-16.
Tray1 Paper key
Press the Tray1 Paper key to enter the Tray 1 paper size setting
mode. You can enter this mode only from off-line.
Shift key
While holding down the Shift key, press the Menu key. Each menu
is displayed in reverse order.
While holding down the Shift key, press the Item key. Each item is
displayed in reverse order.
While holding down the Shift key, press the Select key. Each user
selection value is displayed in reverse order.
Menu key
Press the Menu key when off-line to enter the menu mode.
Repeated key operation displays the menu group in order.
Item key
Press the Item key in the menu mode to enter the item mode.
Repeated key operation displays the items in order.
Select key
Press the Select key in the item mode or the tray 1 paper size set-
ting mode to enter the user selection mode. Repeated key opera-
tion displays the user selection values in order.
3. Control Panel
Intro1.frm 8 ページ ２００３年１１月１８日 火曜日 午前９時５０分