Filter
Top Products
Utility Mode
10
Network Fax 10-31
Utility Mode Chapter 10
10.10 TCP/IP Setting
When a setting is made to ON, set the IP Address, the Subnet Mask and the
Default Gateway.
!
Detail
Refer to "User’s Guide (Network/Scanner)" for more information about
TCP/IP Setting.
*
indicates factory default setting.
TCP/IP Setting
1 Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).
2 Press [Network Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Network
Setting], enter 5 through the numeric keypad.
Item Description Available value
TCP/IP Setting Set the TCP/IP. ON
*
/OFF
When a setting is made
to ON, set the IP Ad-
dress, the Subnet
Mask and the Default
Gateway.