Filter
Top Products
10
Utility Mode
10-52 Network Fax
Utility Mode Chapter 10
10.18 TX/RX Setting
These are the options on the defaults of transmission and reception modes.
* indicates factory default setting.
*1
: The displays are different depending on the country.
*2
: To make the setting of [Print Paper Size] enable, set [Tray Selection for
RX Print] to [Auto].
*3
: Tray type may be different depending on the installed option.
*4
: When [Min. Reduction for RX Print] is set to [x1.0], [Print Paper
Selection] and [Tray Selection for RX Print] are set to [Auto]. [Print
Separate Fax Pages] is turned to [OFF].
*5
: When receiving a fax in the color mode, the text is always recorded in
life size.
Item Description Available value
Duplex Print
(RX)
When set to ON, the original received is
printed on both sides of the paper.
Not indicated when [Print Separate Fax
Pages] is ON.
OFF
*
/ ON
Inch Paper Pri-
ority Over A4
*1
By setting this function ON, inch series
form of paper is preferentially selected for
the received original.
OFF
*
/ ON
Print Paper Se-
lection
When the priority of each size is set:
A record is made in the priority size. When
no priority size is set, a record is made in
the nearest size.
When the fixing of each size is set:
A record is made only in the size set.
Auto Select
*
/ Fixed
Size / Priority Size
While in the reception
in color mode, this is
fixed to [Auto Select].
Print Paper
Size
*1
*2
Set the paper size on which the document
received is printed.
The default varies according to the setting
of [Inch Paper Priority Over A4].
A3 / B4 / A4
*
/ 8
1
/
2
× 11
/ 8
1
/
2
× 14 / 11 × 17
Tray Selection
for RX Print
*3
Determines the paper tray if you want to fix
the paper tray for received document.
Auto
*
/ Tray 1 / Tray 2 /
Tray 3 / Tray 4
While in the reception
in color mode, this is
fixed to [Auto].
Min. Reduction
for RX Print
*4
*5
Set the output magnification of the original
received.
87-96
*
/ × 1.0
Print Separate
Fax Pages
*6
Determines the default of transmission
mode.
Not indicated if Duplex Print (RX) is ON.
OFF
*
/ ON
No. of Sets (RX) Set the number of prints for the received
document.
1
*
-10