Filter
Top Products
Transmission
3
Network Fax 3-39
Transmission Chapter 3
3.8 When Unable to Send (IP Address Fax)
If a facsimile cannot be sent due to a busy signal from the other party
machine or for some other reason, the redial function can be used for the
transmission.
The redial function of this machine includes the auto redial function and
manual redial function.
!
Detail
Address cannot be changed by the auto redial function nor the manual
redial function.
Refer to page 5-2 if transmission cannot be still effected by redialing due
to a line trouble or for any other reason.
There is no re-transmission function of the E-mail provided for the
Internet fax. When the E-mail cannot be sent, see page 5-2.
Redialing
Redialing refers to dialing the number of the same destination again.
If a facsimile cannot be sent due to a busy signal from the other party
machine or for some other reason, the machine redials the number after a
predetermined amount of time has elapsed. During that interval before the
number is redialed, the transmission document is treated as a reserved
document waiting to be sent.
Auto Redial function
If a facsimile cannot be sent due to a busy signal from the other party
machine or for some other reason, the address is automatically redialed
according to the [Number of Redials] which has been set to the Telephone
Line Settings.
!
Detail
The redialing function is set at factory to redial one time after a three-
minute interval. The number of redials and the redialing interval can be
changed in the Utility Mode. For details, see "Telephone Line Settings"
on page 10-50.