Filter
Top Products
3
Transmission
3-16 Network Fax
Transmission Chapter 3
3.5 Setting Transmission Conditions
Original Image Type, Density, Simplex/Duplex and Resolution are displayed
when [Scan Setting] is pressed on the FAX screen. These can be used to set
transmission conditions according to the type of original to be sent.
!
Detail
The condition for transmission cannot be set in units of page.
Setting Transmission Conditions
1 Press [Scan Setting] on the FAX screen.
2 Press the key desired to be set.
– In the case of the monochrome mode
– In the case of the color mode
– Display on the screen varies depending on the country.
!
Detail
For more information about File Type or Color, see page 3-14.
The use of the color mode is available only for the IP Address Fax.