Filter
Top Products
Utility Mode
10
Network Fax 10-61
Utility Mode Chapter 10
!
Detail
When selecting [ON] in “TX Result Report Check”, the TX Report will be
printed if YES is selected. The report will not be printed if NO is selected.
While in the selection of [1 Dest. at time], the output of the Broadcast
Result Report is restricted only when a redial is tried with no successful
transmission available. When a transmission is terminated normally, no
report is issued.
Report Settings
1 Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).
2 Press [Fax Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
3 Press [Report Settings].