Filter
Top Products
10
Utility Mode
10-38 Network Fax
Utility Mode Chapter 10
10.13 Network Fax Function Settings
Set items related to the network fax.
*
indicates factory default setting.
2
Note
To use the IP Address Fax function, a fax kit is required optionally.
For details of the optional fax kit, contact your service representative.
Network Fax Function Settings
1 Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).
2 Press [Network Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Network
Setting], enter 5 through the numeric keypad.
Item Description Available value
Network Fax
Function Set-
ting
IP Address Fax When the IP Address Fax is
used, a setting is made to ON.
ON / OFF
*
Network Fax
Function Set-
ting
Internet Fax When the Internet fax is used, a
setting is made to ON.
ON / OFF
*