Filter
Top Products
Technical Information
C/2
↑ and ↓ Scroll through a menu list.
←and→ To toggle values or settings.
↵ The enter key, to select the highlighted item.
0
/
9
Numbers, used in places where values are to be entered.
+
/
_
Used when required, similar to numbers.
F9 Restores the original settings that you entered with.
F10 To restore the original default setting
Warning
F9 will not restore the date settings and pressing F10 may put in a default
setting that could have been changed by our factory during production build.
We recommend that you make a note of ALL of the settings before any
changes are made.
Set-up starts on its own
This can happen for three reasons.
• There is a configuration error, or fault. In which case an error
message may well appear. A list of these is given at the end of
this chapter.
• The BIOS battery may be running down. In this case you may
also get error messages. If it happens every time you boot up,
you may have to change the motherboard battery. Instructions
for this are in the appendix B ‘System Motherboard’.
• The system‘s configuration may have been changed. More system
memory, more cache memory, or an upgrade that uses ISA
interrupts etc.
If you are unable to resolve any problem, do not alter too many
settings, but make a note of them and any error messages that
appeared on the screen and call your Apricot dealer or authorised
maintainer.