Mitsubishi Electronics WD8700U Projector User Manual


 
EN-38
ITEM SETTING FUNCTION
LAMP 1 TIME RESET OK The LAMP 1 operation time is reset to 0.
LAMP 2 TIME RESET OK The LAMP 2 operation time is reset to 0.
FILTER TIME RESET OK The filter operation time is reset to 0.
RESET ALL OK The menu settings are reset to the factory defaults (except the
LANGUAGE, PASSWORD FUNCTION, IMAGE CAPTURE, SCREEN,
and NETWORK settings).
• CINEMAMODEcanbeadjustedonlywhenaTV60,TV50,480i,576ior1080isignalisbeingdisplayed.
• WhenSCARTINPUTissettoON,normalcomputersignalsarent projected.
• UseacommerciallyavailableSCART-MiniD-SUB15-pincablewhenconnectingthisprojectorwithanAVdeviceequipped
with the SCART terminal.
• SomeAVdevicesequippedwiththeSCARTterminalarent compatible with this projector.
• TheRESETALLprocessmaytakesometimetocomplete.
• YoucannotcarryoutRESETALLforapprox.2minutesafterthelampswitchingorthelamprelayoperation.
FEATURE menu (continued)
Menu operation (continued)