Mitsubishi Electronics WD8700U Projector User Manual


  Open as PDF
of 79
 
EN-50
7. Select an item you want to set by pressing the or
button.
• Selectthecoloryouwanttoadjustusing
COLOR.
8. Select a setting value by pressing the or
button.
• Youcanenternumbersbypressingthenumber
buttons (0 to 9) while holding down the NUM
button on the remote control.
Repeat steps 7 to 8, if necessary.
Important:
• Thecolortonemaynotbedisplayedcorrectly
depending on the setting value. Set the value within
the proper range.
Set the target values of the brightness and
chromaticity coordinates:
4. Select MEASURE by pressing the or button.
MEASURED DATA
MEASURE
5. Select TARGET DATA by pressing the or
button.
6. Press the ENTER button.
MEASURE – TARGET DATA
COLOR
GAIN
x
y
RED
*
.
***
*
.
***
*
.
***
AUTO PATTERN
ON
7. Select an item you want to set by pressing the or
button.
• Selectthecoloryouwanttoadjustusing
COLOR.
• WhenyousetAUTOPATTERNtoON,thetest
pattern of each color is displayed.
8. Select a setting value by pressing the or
button.
• Youcanenternumbersbypressingthenumber
buttons (0 to 9) while holding down the NUM
button on the remote control.
Repeat steps 7 to 8, if necessary.
Important:
• The color tone may not be displayed correctly
depending on the setting value. Set the value within
the proper range.
Resetting the settings
• YoucanresettheSETTING,MANUAL,and
MEASURE settings to the factory defaults.
1. Display the MULTI-SCREEN menu.
2. Select SETTING, MANUAL or MEASURE by
pressing the or button.
3. Select RESET by pressing the or button.
4. Press the ENTER button.
Adjusting projected images (continued)
Adjusting the color variations
You can adjust the variations in the colors of the
images displayed on multiple projectors using the
menu settings.
(See page 31 for menu setting.)
Adjustment while viewing the screen
1. Display the MULTI-SCREEN menu.
2. Select COLOR MATCHING by pressing the or
button.
OFF
COLOR MATCHING
3. Select MANUAL by pressing the or button.
4. Select MANUAL by pressing the or button.
MANUAL
SETTING
5. Select SETTING by pressing the or button.
6. Press the ENTER button.
MANUAL – SETTING
COLOR
GAIN
SATURATION
HUE
RED
0
0
0
WHITE R
WHITE G
WHITE B
- - -
AUTO PATTERN
ON
- - -
- - -
7. Select an item you want to set by pressing the or
button.
• Selectthecoloryouwanttoadjustusing
COLOR.
• WhenyousetAUTOPATTERNtoON,thetest
pattern of each color is displayed.
8. Select a setting value by pressing the or
button.
Repeat steps 7 to 8, if necessary.
Adjustment using a chroma meter
1. Display the MULTI-SCREEN menu.
2. Select COLOR MATCHING by pressing the or
button.
OFF
COLOR MATCHING
3. Select MEASURE by pressing the or button.
Set the measured brightness and the chromaticity
coordinates:
4. Select MEASURE by pressing the or button.
MEASURED DATA
MEASURE
5. Select MEASURED DATA by pressing the or
button.
6. Press the ENTER button.
MEASURE – MEASURED DATA
COLOR
Y (RELATIVE)
x
y
RED
*****
*
.
***
*
.
***
 previous next