Mitsubishi Electronics WD8700U Projector User Manual


  Open as PDF
of 79
 
EN-42
INFORMATION menu
60.00 Hz
RESOLUTION
1024 x 768
VERTICAL
FREQUENCY
48.36 kHz
5 WIRE
HORIZONTAL
FREQUENCY
SYNC. TYPE
SERIAL NUMBER
INFORMATION
1
1
2
2
FILTER TIME
*****
H
********
...
NEXT LAMP RELAY
COMPUTER1INPUT
opt.
*
D
**
H
RG
HV
B
LAMP 1 TIME (LOW)
LAMP 2 TIME (LOW)
****
H
****
H
ITEM DESCRIPTION
LAMP 1 TIME (LOW)
This item shows the lamp operation time calculated based on that the LAMP MODE of LAMP 1
is LOW.
• WhentheLAMPMODEisSTANDARD,thisitemshowsalongerlampoperatingtimethan
the actual time.
• Whenthelampoperatingtimeis0to10hours,“0H”isdisplayed.Thelampoperatingtime
exceeding 10 hours is indicated by the actual hours.
• Whenthelampoperatingtimereaches3000hours,thebarturnstoyellow.Whenit
reaches 3800 hours, the bar turns to red.
• Theicondisplayedtotherightofthebarshowsthelampstatus.
Yellow: On, Red: End of lamp life or error such as illumination failure, Black: Off
LAMP 2 TIME (LOW)
This item shows the lamp operation time calculated based on that the LAMP MODE of LAMP 2
is LOW.
• WhentheLAMPMODEisSTANDARD,thisitemshowsalongerlampoperatingtimethan
the actual time.
• Whenthelampoperatingtimeis0to10hours,“0H”isdisplayed.Thelampoperatingtime
exceeding 10 hours is indicated by the actual hours.
• Whenthelampoperatingtimereaches3000hours,thebarturnstoyellow.Whenit
reaches 3800 hours, the bar turns to red.
• Theicondisplayedtotherightofthebarshowsthelampstatus.
Yellow: On, Red: End of lamp life or error such as illumination failure, Black: Off
NEXT LAMP RELAY
The next lamp relay time is displayed.
FILTER TIME
The filter operation time is displayed.
SERIAL NUMBER
The serial number of the projector is displayed.
INPUT
Indicates the name of the terminal to which the currently projected video signal is being input.
RESOLUTION
Indicates the resolution of the currently projected video signal.
VERTICAL FREQUENCY
Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL FREQUENCY
Indicates the horizontal frequency of the currently projected video signal.
SYNC. TYPE
Indicates the type of the sync signal for the currently projected video signal.
• NEXTLAMPRELAYisn’tdisplayedwhenLAMPRELAYisOFForLAMPSELECTisLAMP1orLAMP2intheINSTALLATION
1 menu.
Menu operation (continued)
 previous next