Filter
Top Products
763 Waiting to dispense label. Press
F.
764 Verifier scan error (bad scan). Press
E to clear the
error and continue printing. The printer does not
recalibrate after this error.
765 The printhead has less than 8 bad dots. The printer
can shift bar code fields to avoid bad dots. You may
need to press
E to continue printing. Print a test label
to confirm the number of bad dots.
768 Printhead has more than 8 bad dots within the format
area or is not connected. Connect the printhead.
772 Verifier failure. The verifier detected three or more bad
scans in a row. Press
E to clear the error and
continue printing. The printer does not recalibrate after
this error.
773 Verifier is enabled, but not connected. Make sure the
I/O cable and/or serial cable is connected to the verifier.
Refer to your verifier’s Operating Instructions for more
information.
791 The printer has an error pending. Turn off the printer.
Wait 15 seconds (until the power light is completely
dim) and turn it back on. Resend the packets.
12-10
Diagnostics & Troubleshooting