Filter
Top Products
3. Press
N. The current setting is displayed, for example:
Enter contrast
[-390/156]: +0
4. Press l or r to change the contrast. Pressing r darkens
the print; l lightens the print.
Feed (
F) acts as a toggle switch to change the value by 10 or 1.
For example, to make the contrast 50 (from the default of 0),
press
F, then press r five times (50).
5. Press
N to select either "Yes" or "No" to print a test label
and check the print contrast. Press
N.
6. Press
E until you see the Main Menu.
We recommend you check the bar code print quality with a bar
code verifier. If you do not have a bar code verifier or scanner,
check the bar code visually. A bar code that is in spec has
complete bars, clear spaces, and small alphanumeric characters
look complete. An in spec bar code may not look as good as one
that is too dark, but it has the highest scan rate.
Dark
IN SPEC
Light
Setting Supply Options
6-19